引用本文
  • 欧大生,尹成彬,陈萍.船用柴油机曲轴轴心运动特性分析及试验研究[J].柴油机,2014,36(1):34-37.    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 626次   下载 656 本文二维码信息
码上扫一扫!
船用柴油机曲轴轴心运动特性分析及试验研究
欧大生,尹成彬,陈萍
0
武汉海军工程大学动力学院,湖北 武汉 430033
摘要:基于AVL Excite Designer软件建立了6150型柴油机曲轴动力学模型,得到主轴承在标定工况下的轴心轨迹图及最小油膜厚度图,并据此对轴承的工作状况进行分析。试验结果和理论结果比较表明,最小油膜厚度理论值与试验值接近,但轴心运动轨迹的计算结果同试验结果有一定的偏差;同时试验也验证了所开发的试验装置可以方便地进行曲轴轴心轨迹的试验测量和分析,可以实时对船用柴油机的轴承工作状态进行评估。
关键词:  船用柴油机  主轴承  轴心轨迹  电涡流传感器
Analysis and Experimental Study of Kinetic Characteristic of Marine Diesel Engine Crankshaft Axle Center
Ou Dasheng,Yin Chengbin,Chen Ping
Abstract:In order to get trajectory diagram of journal center and minimum oil film thickness diagram in calibrated work condition, 6150 diesel engine crankshaft dynamic model was built with AVL Excite Designer software. Based on these, analysis was carried out on the working condition of the bearing. Contrasting test results with theoretical values, it shows that the results of minimum oil film thickness is close, whereas the results of trajectory diagram of journal center has some deviations. This experiment also verifies that the testing unit can measure and analyze trajectory of journal center conveniently and evaluate working state of diesel engine’s bearing in real time.
Key words:  marine diesel engine  main bearing  trajectory of journal center  electrical current eddy transducer〖FL