引用本文
  • 刘亚峰,黄映云,汪宏伟.柴油机连杆结构强度仿真及试验研究[J].柴油机,2014,36(5):20-23.    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 628次   下载 0 本文二维码信息
码上扫一扫!
柴油机连杆结构强度仿真及试验研究
刘亚峰,黄映云,汪宏伟
0
海军工程大学动力工程学院,湖北武汉430033
摘要:对某柴油机连杆进行静强度试验研究,得到了连杆的应力分布情况。利用三维实体建模软件对连杆总成进行实体建模,通过有限元软件对其进行静力分析,仿真结果与试验结果吻合。利用仿真结果对连杆进行了疲劳安全分析,确定其结构的可靠性。
关键词:  柴油机  连杆  应力分布  疲劳安全系数
The Structural Strength Simulation and Testof the Diesel Engine Connecting Rod
Liu Yafeng,Huang Yingyun,Wang Hongwei
Power Engineering College, Naval University of Engineering, Hubei Wuhan 430033
Abstract:Based on a static test studying the tension and compression on the connecting rod, the stress distribution of it was obtained. 3D modeling software was used to establish the connecting rod assembly 3D models, FEM software was used to do the load analysis, the result of FEM was very similar to the test. Then, the fatigue safety analysis of the connecting rod was carried out based on the results of computer simulations, the reliability of its structure was verified.
Key words:  diesel engine  connecting rod  stress distribution  fatigue safety factor〖FL