引用本文
  • 赵军,董佳欢,于胜,乐美鑫.泵组隔振设计及实船测试研究[J].柴油机,2020,42(3):53-55.    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 726次   下载 535 本文二维码信息
码上扫一扫!
泵组隔振设计及实船测试研究
赵军,董佳欢,于胜,乐美鑫
0
中国海洋大学,山东 青岛 266100;七一一研究所,上海 200090;船舶与海洋工程动力系统国家工程实验室,上海 201108;江南造船集团有限责任公司,上海 201913
摘要:针对某科考船冷却水泵组开展泵组隔振设计。通过上下层隔振器选型及中间筏体结构设计,使系统的各阶模态频率在一定程度上低于主要扰动频率,同时使筏体的主要振动模态远离扰动频率。仿真计算和实船测试结果验证了该泵组隔振设计达到相应设计要求。
关键词:  冷却水泵组  隔振  有限元法
Research on Pump Set Vibration Isolation Design and its On Board Test
Zhao Jun,Dong Jiahuan,Yu Sheng,Le Meixin
Ocean University of China, Shandong Qingdao 266100;Shanghai Marine Diesel Engine Research Institute,Shanghai 200090;National Engineering Laboratory for Marine and Ocean Engineering Power System,Shanghai 201108;Jiangnan ShipyardGroup Co., Ltd., Shanghai 201913
Abstract:The vibration isolation design of the cooling water pump set of a scientific research vessel was carried out. To make the modal frequency of different orders lower than main disturbance frequency to some extend, and keep the main vibration mode far away from the disturbance frequency, the type selection of upper and lower vibration isolators and the structural design of middle raft were carried out. The simulating calculation and on board test results verified that this pump set vibration design could meet the design requirements.
Key words:  cooling water pump set  vibration isolation  finite element