引用本文: |
-
陆传荣,朱峰,金梅,徐久军.CKS活塞环与合金铸铁缸套匹配规律研究[J].柴油机,2014,36(3):14-17. [点击复制]
- [点击复制]
|
|
|
|
本文已被:浏览 770次 下载 827次 |
 码上扫一扫! |
CKS活塞环与合金铸铁缸套匹配规律研究 |
陆传荣,朱峰,金梅,徐久军 |
|
海军驻七一一研究所军事代表室,上海201108;大连海事大学,辽宁大连116026 |
|
摘要:针对CKS活塞环-合金铸铁缸套配对副,将CKS活塞环与不同材质、珩磨纹角度和表面粗糙度的合金铸铁缸套对磨,通过比较各配对副的摩擦、磨损性能和抗黏着性能,研究CKS活塞环与合金铸铁缸套的匹配规律。研究结果表明:当与CKS活塞环配对时,四种材质缸套的抗黏着性能相近,CuVTi材质的缸套表现出较低摩擦系数和磨损量;缸套珩磨纹角度为40°、表面粗糙度为1μm时,摩擦、磨损和抗黏着性能更优。 |
关键词: 合金铸铁缸套 CKS活塞环 匹配 性能 |
|
Matching Rule of CKS Piston Ring with Alloy Cast Iron Cylinder Liner |
Lu Chuanrong,Zhu Feng,Jin Mei,Xu Jiujun |
Naval Deputy Office of Shanghai Marine Diesel Engine Research Institute, Shanghai 201108;Dalian Maritime University, Liaoning Dalian 116026 |
Abstract:CKS piston ring had been matched with alloy cast iron cylinder liners of different composition, honing angle and surface roughness. Friction, wear and anti-scuffing properties were compared to study the matching rule of friction pair. The results showed that:when matched with CKS piston ring, the anti-scuffing properties of cylinder liner made of four different materials were similar, and CuVTi alloy cast iron cylinder liner showed a lower coefficient of friction and wear. The honing angle of 40°and surface roughness of 1μm showed better friction, wear and anti-scuffing properties. |
Key words: alloy cast iron cylinder liner CKS piston ring matching performance〖FL |
|
|
|
|
|