引用本文: |
-
强永平,蔡忠周,徐春龙,文明,许俊峰,李耀宗.燃烧室形状对燃烧过程的影响研究[J].柴油机,2011,33(2):1-6. [点击复制]
- [点击复制]
|
|
|
|
本文已被:浏览 723次 下载 0次 |
码上扫一扫! |
燃烧室形状对燃烧过程的影响研究 |
强永平,蔡忠周,徐春龙,文明,许俊峰,李耀宗 |
|
中国北方发动机研究所,山西大同,037036 |
|
摘要:针对燃烧室形状对燃烧过程的影响进行了研究,得到了喉口直径对喷雾贯穿距离、索特平均直径(SMD)、湍动能、涡流强度、缸内压力、放热规律以及NO-SOOT的影响规律,并通过三维对比分析了燃烧反应率场、温度场、浓度场以及速度场的变化趋势.分析表明:在本次研究中燃烧室喉口直径的合理范围是100~120 mm. |
关键词: 燃烧室, 特征参数, 燃烧过程 |
|
Influence of Combustion Chamber's Shape on Combustion Process |
Qiang Yongping,Cai Zhongzhou,Xu Chunlong,Wen Ming,Xu Junfeng,Li Yaozong |
China North Engine Research Institute,ShanxiDaton9037036 |
Abstract:The influence of combustion chamber's shape on combustion process is studied,and the influence
rule of the diameter of throat on spray penetration,SMD,turbulence energy,vorticity cylinder
pressure,heat release rule and NO—SOOT are obtained.Moreover,The combustion reaction rate field,
temperature field,concentration field and velocity field are compared and analyzed through 3 D method.
The analysis results show that the diameter of throat should be kept in a rational range of 100~120 mm. |
Key words: combustion chamber characteristic parameters combustion process |
|
|
|
|
|