引用本文
  • 葛长景,平涛,巫立民,李丽婷,张华兵.某柴油机滤清器支架的仿真计算及结构优化[J].柴油机,2020,42(1):28-31.    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 679次   下载 431 本文二维码信息
码上扫一扫!
某柴油机滤清器支架的仿真计算及结构优化
葛长景,平涛,巫立民,李丽婷,张华兵
0
七一一研究所,上海 201108
摘要:针对某型柴油机在工作过程中出现的滤清器支架失效问题,采用ABAQUS、FEMFAT等软件对该支架进行有限元分析。通过模态分析评估支架是否存在共振风险;通过静强度和疲劳寿命校核,评估支架是否存在疲劳失效风险。在此基础上对原支架结构进行了优化。改进后的支架随整机通过了可靠性试验验证。结果表明:支架优化方案合理,能够满足使用要求。
关键词:  柴油机  滤清器  支架  有限元分析
Simulation and Structure Optimization of the Filter Bracket on a Diesel Engine
Ge Changjing,Ping Tao,Wu Limin,Li Liting,Zhang Huabing
Shanghai Marine Diesel Engine Research Institute, Shanghai 201108
Abstract:The filter bracket of a diesel engine was broken and out of work during engine operation. To deal with this failure, ABAQUS and FEMFAT software was used to carry out finite element analysis. The risk of resonance of the filter bracket was evaluated by modal analysis. The risk of fatigue failure of the filter bracket was evaluated by static strength and fatigue analysis. Based on the analysis results, the structure of the filter bracket was optimized. The optimized bracket passed the reliability test verification with the whole engine. The results show that the optimization scheme of the filter bracket is reasonable, and can meet with the application requirements.
Key words:  diesel engine  filter  bracket  finite element analysis