引用本文
  • 李晓霞.270柴油机曲轴热处理工艺性能分析[J].柴油机,2014,36(6):39-42.    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 684次   下载 671 本文二维码信息
码上扫一扫!
270柴油机曲轴热处理工艺性能分析
李晓霞
0
中国北车集团大连机车车辆有限公司,辽宁大连116022
摘要:针对270柴油机曲轴用钢采用德国材料牌号50CrMo4,对该钢进行了材料成分测定,原始组织检验和等温转变曲线、连续冷却转变曲线的分析,为热处理参数的选择提供了依据。通过8种方案进行小件工艺试验,检测了小件试样的力学性能和金相组织,从而筛选出合适的方案,最终得出270柴油机曲轴的最佳热处理工艺。
关键词:  柴油机  曲轴  50CrMo4  热处理
Heat Treatment of 270 Diesel Engine’s Crankshaft
Li Xiaoxia
Dalian Locomotive and Rolling Stock Co.,Ltd., CNR Group, Liaoning Dalian 116022
Abstract:270 diesel engine’s crankshaft uses the German material 50CrMo4. Tests was carried out on the steel material composition, original microstructure was detected, and analysis of isothermal transformation curve and continuous cooling transformation curve was done for research, which provides references for the selection of heat treatment parameters. Samples were tested with eight different heat treatment programme, and the respective mechanical performance and microstructures were obtained. Based on the analysis results, the optimal scheme was selected and the best heat treatment process was discovered for 270 crankshafts.
Key words:  diesel engine  crankshaft  50CrMo4  heat treatment〖FL