| 摘要:在GT-POWER与Matlab耦合仿真和试验验证的基础上,对电控泵管嘴燃油喷射柴油发电机组在脉冲工况下的动态特性进行了仿真,研究了不同PID控制参数对脉冲工况下柴油机性能的影响,得到了一组理想的控制参数；并提出了首脉冲负载加载前提高柴油机转速的方案,以增大机组轴系在脉冲负载加载前的能量,减小机组在脉冲过程中的动态调速率。仿真结果显示,在理想的PID参数下,机组的动态调速率可由现场试验的6.8%降至4.0%,如果首脉冲负载加载前提前升高柴油机转速,机组的动态调速率可降至2.8%。 |
| 关键词: 柴油发电机组 电控泵管嘴系统 脉冲负载 控制策略 |
|
| Research of Control Strategy for Electronic Control Pump-Pipe-Nozzle System in Diesel Gensets under Pulsed Load |
| Yuan Liguo,Zeng Fanming,Xing Guangxiao |
| College of Naval Architecture and Power,Naval University of Engineering,HubeiWuhan 430033 |
| Abstract:Based on coupled simulation of GT-POWER with Matlab and test verification, the dynamic performance of diesel gensets with electronic control pump-pipe-nozzle system were simulated under pulsed load. Then, the influences of PID control parameters on engine's performance under pulsed load were analyzed and a set of ideal PID parameters were obtained. In order to increase the unit's shaft energy before first pulse load and decrease dynamic speed droop, the control strategy of increasing unit's speed before first pulse load is put forward. Simulation results show that the unit's dynamic speed droop decreases from 6.8% in field test to 4.0% in simulation with optimized PID parameters. If the unit's speed is increased before first pulse load, its dynamic speed droop can decrease to 2.8%. |
| Key words: diesel genset electronic control pump-pipe-nozzle system pulsed load control strategy〖FL |
