引用本文
  • 胡云萍,李秋霞.柴油机双进气道流动特性试验与数值模拟[J].柴油机,2010,32(4):24-28.    [点击复制]
  •    [点击复制]
【打印本页】 【在线阅读全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 740次   下载 477 本文二维码信息
码上扫一扫!
柴油机双进气道流动特性试验与数值模拟
胡云萍,李秋霞
0
聊城大学汽车与交通工程学院,山东聊城252059
摘要:对170系列柴油机双进气道进行了AVL气道稳流试验,得到了不同气门升程下对应的AVL流量系数和涡流比;在与稳流试验对等的边界条件及评价方法下,利用CFD软件Fire对气道稳流试验进行了数值模拟。模拟结果与试验结果的对比表明,数值模拟所得流量系数和涡流比与试验结果基本吻合,模拟结果具有一定的可信度;另外,从两者涡流比随气门升程的变化曲线来看,切向气道气门座孔加工出的偏心倒角,对气道形成涡流的能力影响比较大,尤其是在气门开度较小时,能使气道产生相对较大的涡流比。
关键词:  柴油机  双进气道  稳流试验  数值模拟
Test and Numerical Simulation of Flow Performancein Diesel Double-intake Port
Hu Yunping,Li Qiuxia
School of Automotive & Transportation Engineering, Liaocheng University, ShandongLiaocheng252059
Abstract:AVL steady flow test was carried out on 170 series diesel double-intake port, and the AVL flow coefficient and swirl ration under different air valve lift were obtained. With the same boundary conditions and evaluation methods, CFD software Fire was applied to simulate the steady flow in intake port. The comparison results show that the flow coefficient and swirl ratio from numerical simulation are consistent with those from testing, and the accuracy of simulation is acceptable. In addition, according to the proportional relation between swirl ratio and valve lift, the machined eccentric chamfer on valve seat of tangential port has a profound impact on swirl generation, especially in condition of small valve lift, which may result in bigger swirl ratio.
Key words:  diesel engine  double intake port  steady flow test  numerical simulation