| 摘要:针对某含齿轮箱的高速主推进轴系，基于具有自主知识产权的软件SPSDP 06进行轴系校中计算，并将计算结果与CCS的COMPASS计算结果进行对比分析。结果表明:对于相同的轴系，两种软件的计算结果的相对误差小于5.8％；自主研发的SPSDP 06轴系校中软件已具有工程应用价值。在此基础上给出了轴系现场安装的一些建议。 |
| 关键词: 轴系 校中 软件 安装 |
|
| Shafting Alignment Calculation Based on SPSDP 06 SoftwareWith Self-Owned Intellectual-Property Rights |
| Wang Jianzheng,Zhou Qingbo,Liu Zhangchao |
| Shanghai Marine Diesel Engine Research Institute, Shanghai 200090;Wuhan University of Technology, Hubei Wuhan 430063;Shanghai Marine Diesel Engine Research Institute, Shanghai 200090;National Engineering Laboratory for Marine and Ocean Engineering Power System,Shanghai 201108 |
| Abstract:Shafting alignment calculation based on SPSDP 06 software with self-owned intellectual-property rights was carried out on a high speed main propulsion shafting with gear box. The calculation results were compared with the results using COMPASS developed by CCS. It showed that with the same shaf-ting, the relative error of the calculation results with the two different software was less than 5.8％. The self-developed SPSDP 06 shafting alignment software was thus proved to have the value of engineering application. Some suggestions are given on in-field installation of shafting. |
| Key words: shafting alignment software installation |
